T43 IBM ThinkPad T43 Laptop CPU Cooling Fan and Heatsink

100% Brand New and High Quality IBM ThinkPad T43 Laptop CPU Cooling Fan and Heatsink

Specification:
Unit: 1 pcs
Type: Laptop CPU Fan
Compatible with Part No.: 26R9066, 26R9074
Condition: Brand New
Warranty: 3 Months
Remark: Tested to be 100% working properly.


Product Introduction:
IBM ThinkPad T43 Fan are made from highest quality parts, the IBM laptop fan are tailored made according to the original size, whether the appearance, size and quality are the same as with the original. Every IBM ThinkPad T43 Cooling Fan should be under strict quality control before leaving the factory, and has passed the authentication of CE, UL, EMC, CQC, ROHS, etc.

Fit Laptop Models:

IBM ThinkPad T40 Laptop,
IBM ThinkPad T41 Laptop,
IBM ThinkPad T42 Laptop,
IBM ThinkPad T43 Laptop

IBM Laptop CPU Fan 100% Warranty:

* 100% Q.C. of IBM ThinkPad T43 Laptop CPU Cooling Fan.
* Guaranteed to Meet or Exceed Original Specifications.
* Items are usually shipped within one business day of payment receipt.
* We guarantee 100% satisfaction!


How to Replace a IBM ThinkPad T43 Fan?

1. Follow your laptop owner's manual and assembly guide carefully as you disassemble the laptop. Touch something metal periodically to remove static charge, and work on a large table with a bright light source.

2. Turn off the laptop and unplug it. Remove the main battery, CD/DVD drive and the hard drive. The hard drive is usually located in a slot on one side of the laptop. Remove the screw that holds the cover in place, then pull out the hard drive sled.

3 Turn the laptop over and remove the screws on the bottom that hold the keyboard in place. Flip the laptop over, open it, then lift the keyboard up and out. Unplug the flexible ribbon cable that connects the keyboard to the motherboard.

4 Remove the screws that hold the keyboard bezel and palm rest in place. Carefully pry loose any plastic snaps on the sides, then lift the bezel and palm rest up and out.

5 Unplug the IBM CPU Fan. Remove the screws that hold the heat sink and fan in place, then remove the entire unit from the laptop. Remove any thermal compound residue from the bottom of the heat sink and the CPU.

6 Apply a thin layer of thermal compound on the CPU, then replace the heat sink and fan. Replace the screws, plug the IBM ThinkPad T43 Fan back in, then reassemble the laptop.

7 Plug the laptop in and turn it on. After you use it for a few minutes, you should hear the new fan running and feel warm air blowing from the vent on the side of the laptop. A IBM Fan does not run continuously, so don't be concerned if the IBM ThinkPad T43 Fan shuts off periodically.