HP Pavilion dv8000 Laptop CPU Cooling Fan

Brand New HP Pavilion dv8000 Laptop CPU Cooling Fan, the HP Pavilion dv8000 Fan are made from highest quality parts, the HP laptop fan is fully tailored made according to the original size, whether the appearance, size and quality are the same as with the original. Every HP Pavilion dv8000 fan should be under strict quality control before leaving the factory, and has passed the authentication of CE, UL, EMC, CQC,ROHS, etc.

Specification:
Package Content: 1x CPU Cooling Fan
Type: Laptop CPU Fan
Condition: Brand New
Warranty: 3 Months

HP Pavilion dv8000 Laptop CPU Cooling Fan Tested to be 100% working properly.

Compatible with Part Number:
418409-001, 407862-001, 414226-001    

Fit Laptop Models:

HP Pavilion dv8000 Laptop

HP Laptop CPU Fan 100% Warranty:

* 100% Q.C. of HP Pavilion dv8000 Laptop CPU Cooling Fan.
* Guaranteed to Meet or Exceed Original Specifications.
* Items are usually shipped within one business day of payment receipt.

How to Replace a HP Pavilion dv8000 Fan?

Heat can build up quickly inside of a laptop because of the small amount of space. The fan ventilates the hot air out of the computer, allowing the electrical components to work without heat damage. If the fan on a laptop stops working, it can be replaced with a few tools. Methods of replacement vary depending on the laptop model, so refer to the service manual included with your laptop, if necessary. Repair this problem quickly to avoid overheating and failure of your laptop.

1. Turn off the computer and disconnect any electrical devices. Remove the battery and ground the computer, according to the service manual.

2. Remove the system board, according to the service manual. The method of removal varies depending on the type of laptop.

3. Disconnect the fan connector, and remove the screws while holding the HP Pavilion dv8000 Fan in place on the system board. Remove the fan.

4 Place the new HP laptop fan onto the system board where the old one was removed. Line up the screw holes. Use a screwdriver to replace the screws and secure the fan into place.

5 Plug the HP Pavilion dv8000 Fan connector into the system board.

6 Assemble the laptop, according to the service manual, and turn it on. Listen for the HP Pavilion dv8000 fan to make sure it runs properly.